Search results

Circuit brand hand guards from England are designed to absorb impact ( bend ) and not transmit big hit into hands and break wrists etc these hand guards are made completely from Nylon - No Aluminum Bar to transmit impact into hands - Circuit hand guards cost $100 for pair - plus mounting...

look my post - Use Gopro to adjust suspension - bottom picture Zoom in can see this being used on rear caliper - Yup only time i use Full safety wire now is on something like frame bolt that Never gets undone

I put Loop of wire on bolt head = 0 then I put Zip tie thru loop to frame / bracket etc - faster to install remove and lighter weight

Wow Very Cool

kNewc Thanks for info on using - think I talked to the guy who ghosted you - he is missing some personal skills - The peg clamps Looks like Good Idea but not done well - short Good straps may be better or a combo of the 2 dropping parts in dirt is not good Pegs on the YZ are titanium and...

this is rear tire of Yamaha WR450F Supermoto street plated - fork springs were .32 KGM rear spring was as light as I could get - dont remember #s for sure - Lowered suspension 2 inches front and rear so I could touch ground easier at stop lights - after using Gopro to dial in suspension was...

Nice Bike

this photo One inch End of tape is Even with Front of Swing arm - 12 inches

How many pictures can be put in a post ? so far I can only put one photo each post ? this photo the One inch end of tape is Even with Top of Bottom frame rails - 15 inches

this is measurements of engine area - Frame is double top tube - it is 8 inches ID between top Frame tubes at rear of air box - the tank mount bracket sticks inward on frame about a inch - one on Both sides Narrows to 7.5 inches ID just in front Top of rear shock mount -

the Ultimate MX Hauler / MotoJackrack / Switch Hauler are a bike lifts that plugs into trailer hitch - Look pretty cool and likely Any of these could work good - uses hydraulic jack to lift bike from Under Skid plate 2 of these companies Copied the first company so these are pretty...

picked up this 2011YZ450F last week - very clean starts right up - Nice bike already have V3 motor kit with 25kw controller - this is #5 Yamaha 450 I have owned - the others were made into Supermoto Bikes - still gas powered Im sure this will be the Most Fun to ride

to help in adjusting suspension I use a GoPro type camera to See what suspension/ tire are doing during ride - best location for cam is in center of bike and as Low down as you can mount it to get best view of tire contact - if you have 2 cams its best to record both front/rear tire at same...

Bike looks Good 2025 - is front part of the lower motor mount bracket there to add back rigidity lost when removing the stock motor ?

not having to shift makes a Giant difference - trail im riding now is 12 miles long - i ride trail as fast as Surron Lt Bee will go and have 48% battery left - Building a YZ now so i can have good suspension -

I got a Honda CR250 and a Surron Lt Bee first year they came out - both were good bikes and zero mechanical problems - Stark looks Great to me -

I use 2 tesla model S battery bricks to charge a surron - using Victron Phenix 1200watt PS inverter - this inverter will operate down to 19v ( only one time have gotten this low ) surron charger draw is 650w at 120v at this load inverter fan very quiet - with all the new LFP batteries...

I have 2 Tesla model S battery bricks 10.4 Kwh total at 24 volt use 750 watts flexible solar panels to charge battery bricks - tesla battery are 55 pounds each - wired in parallel use to Charge my Sur ron LT Bee battery 1.7Kwh at 62 volt 1200watt Victron PS inverter to surron charger -...

talked to a dealer that has 4 bikes that delevery date is December - he said more likely February Varg will be worth the wait - when Starlink first came out I had to wait 11 months to get dish - Totally worth it -

suspension on LT Bee is pretty bad - bike goes fast enough to Need real suspension or it gets dangerous - Bad suspension is the only thing holding Ebikes back - once KYB or similar OR a new Startup makes Good suspension that fits on ebikes its whole new ball game -