Search results

Did you try holding the map up and down buttons at the same time to start the update? Basically you treat it just like it is flashing magenta. I am no longer familiar with the software but a while ago that would work.

IIRC, the charger does not send the AC input voltage to CAN bus. This means the bike has no way of knowing if the charger is plugged into 120VAC or 230VAC. So if the bike charges fine on 230VAC but very slowly on 120VAC then I would suspect other things besides the software. Perhaps 120VAC is...

I have been working on EV stuff for about 20 years now. For anyone interested here are my thoughts on safety related things: 1) Biggest worry is mechanical injury. As a design engineer for the drive system I work together with people assembling, testing, and maintaining the prototypes -- people...

Having written the code for this it is really amusing reading this thread. Let's just say most of the guesses are quite poor and some a bit paranoid. Oh well, to be expected.

Here is a dyno run with stock front and rear sprockets.

Vargs started production before that date. I wasn't there so I can't say for sure if Taddy's bike had a lanyard or not. However, during the media event when the press came to Barcelona the Vargs all had lanyards. It is not difficult to add a lanyard and can be done in half an hour (for Stark...

this is a kill switch: what you have in your picture is a _lanyard_ You should have requested a lanyard system to stop the wheel spinning. They do not currently sell such a system but the bike can be made to work with one. If there is enough demand I suppose they will produce and sell such a...

The power button (the red one) is effectively the kill switch. As soon as you press it the bike goes into "neutral" and won't respond to throttle - this is displayed clearly on the LED. If you hold this button for a bit longer (like a second) the bike will turn off. You will hear a "clunk" sound...

Haven't seen it posted; my favorite Varg video. Nice scenery and stats at the end. Gave some ideas for software which are in the pipeline.

Stark or the USofA / states? Comes direct to door in other countries.

yep :)

You should post that classic German forklift safety video. Do you know which one I am talking about?

Nobody here understands my sense of humor but that doesn't mean I'm gonna stop. WRT protection:

I cannot say for sure; we will have to wait for analysis of failed components. What I did say is that I have seen the bike take repeated abuse in testing. Complete overjumps of tabletops on purpose with the bike landing on completely flat ground. They had to put extra strong wheels on the bike...

It takes time and testing to get it right. They will come through with what they promised (and more).

Some neat stuff is coming software-wise.

Stark said the bike is going back to Spain for analysis so hopefully they will be able to determine what happened. I have seen it take repeated hard hits in testing so I think it is probably not a design issue but we will see what the analysis points to.

???

Ohhhh, now I see from the photos. That 8.2A cannot possibly be measured AC current. The charger does not send AC line voltage or current to CAN bus. Therefore, the bike/phone has no way of knowing if the charger is plugged into 110V or 220V or even what the AC current is. The 8.5A to 8.2A is...

I wasn't involved with homologation. I don't think there is an engine number stamped anywhere on the motor/inverter assembly, but I could be wrong.