Search results

After looking at this picture, it looks like you may have the washer on top of the spline (at the top), instead of "around" it. So yes, loosen it up and center the washer, and re-torque.

It's fine, send it!

If all other things are equal, I would recommend the Racetorx, only because one of the banjo ends of the brake line has a bend, which I think would work better at the adapter on the foot master cylinder. But in the photo, it looks like they are using the bent end at the left hand MC, and it...

That's great to have those options, but if you want an enduro bike, the EX still seems like the best choice unless it saves significant $$ to get an MX1.2 with enduro suspension and 18" wheel.

There is already 12v "available" for the docking station, the radiator fan, and the water pump.

Well, if she needs access to those 3 drawers behind the rear tire, there might be a complaint!

Same here, I guess I meant to ask that to @Toom38

Right on! did you measure the length of the hose they supplied? And how much more was needed? I am just curious...

The kit I installed included a hose that WAS the right length. I don't remember if it was possible to install the new water pump cover oriented incorrectly, but if so, that may be why the hose was too short?

Hmm, it looks like Group #25 is actually group #26, probably starts with group zero?

Yes, you could weld it, but you can also send a photo of the broken bracket to Stark support, and they will send you a new and improved one for free under warranty. Takes about a week to receive it after emailing. And as rafagas asked, what seat is that? link please!

This was promised to us when they first announced their first bike, which is now referred to as MX1. There was no mention then about a subscription cost. So they basically screwed us out of that, but honestly, I don't feel like I need or want it it anymore, and I don't think I would even do a...

As of 8:45am EST it is now available for order: $12,999 or $13,999 for 80hp. Estimated delivery Jan 2.

The video shows up for me (USA) on the Stark YT page. But the Stark page still says "coming soon."

You can get the foam from Stark, but it's pretty thick, and won't fit with the aftermarket skid plates. THIS^

There is a new water pump cover with a third nipple. There is an extension for the radiator cap. There is a nipple that screws in on the Top/side of the Radiator. There’s a rubber hose to go between above two nipples. And a couple clamps and a hold down for the hose. I think that’s all.

Might be possible, but I wouldn't even try it...just remove it.

I would be amazed if they upgraded everything. I expect they accidentally sent the wrong battery, and will (eventually) send the older style battery. Don’t forget to ask them to extend your warranty to help compensate your downtime, they did it for me.

Sounds like you have developed a portable charger? I’m all ears!