Search results

I use MTB seats with the center cutout. Have seen some cruiser solo seats with them but never a dirtbike seat. That would be an investing concept to experiment with.

@Dirt-E Can you detail what you mean by "thicker seat" since that can be interpreted different ways? Does that refer to taller or wider? In my conversation with them earlier this week (and pasted in an above post), they are working on the Comfort seat for the Varg and hope to have it out soon...

My concern for sealing all case penetration is more for dust/grit/sand than water. It's unlikely that I'll charge in the rain or setting the case in standing water, I'll regularly be charging by setting the case on gravel or sand in parking lots or dispersed camping spot. Perhaps on wet grass or...

@Philip @Fog 25 I assume you are drilling the bottom of the case and bolting down the charger with the OEM bolts? And maybe adding a fender washer with rubber casket or fender washer with a dab of silicon caulk to seal?

My mapping app is set to "Keep phone awake", but it may only keep phone awake if the app is actively doing something. Since I was stationary in the shop, maybe it considers that not active. This afternoon, have to drive into the office so maybe I'll bring the stark phone with and turn on my...

We need a Varg snowbike thread since the Alta guys have/had one. I've been riding snowbikes since 2014. Have done three different builds since then. The last one being a 2020 Yamaha YZ450F with a Yeti 129" snowbike kit. Have thought about electric for a long time, since it would greatly...

These are both super nice solutions. Curious if anyone has done this in any other cases? Have seen the examples of simply adding handles to the OEM aluminum case after removing it from the stand, but looking for something with a bit more protection. I like the idea of having these fulling...

And an example that @Philip did in the HF Apache 3800 case. A lot more pics in post Poll: Are you using the original Stark Varg Stand/Charger as intended? but here is a slick one.

Here is a good example that @Fog 25 shared in post Poll: Are you using the original Stark Varg Stand/Charger as intended? in the HB Apache 4800 case.

I think the group effort cracked the nut! Two different ways, actually. Per your recommendation, @AL_V, I did a Force Stop on the app. That works. I'll add a few pics of those settings below. But, while mucking around in the App screen, I found the real culprit. Stark app has "Display over...

Yeah, the swipe up does close the app, but thinking I may need to Force Stop it. It's a little different with this old version of Android, but you can go to the home screen, long press the Stark App, select App Info and then do a Force Stop. That will be my next experiment.

Seat Concepts has a Race 2.0 on sale for Varg now. They said the various comfort seats, for the Varg, are in the works. I started a thread on it (in the wrong section. Hoping a mod will move it to this section). Link: Varg comfort seat options for trail riding

My personal phone battery last plenty long that I could put a phone mount and use the mapping app on it. But then I have one more thing on the bars and risk damage to my phone. I've seen others adding various Trail Tech gauges (and I use the Trail Tach Voyager Pro on my snowbike and it's very...

Interesting. My app and bike are on the same versions as you. My app is on v.1.0.185 (416). Bike is on 1.0.159 Maybe app didn't shut down all the way, but I hit the button to display open apps and swiped it up, which seemed to close it like on my other android devices. It does pop up...

Just experimented with this in the garage so no actual ride, but it works well enough for what I want to accomplish with a few caveats. What I did: I opened up the Stark app and my mapping app, so both were active. With bike in Neutral (N), I clicked bottom button to Engage and set my...

Heard back from Seat Concepts. As mentioned, the Varg Race 2.0 Foam and Cover kit is already available on their website, but they confirmed they are working on a Varg 'Comfort' Foam and Cover kit. I'll likely go with that and install over the winter. Still have to decide if I just update my...

Dimension of the charger itself (not counting any cords), rounded to the nearest 1/2" are 9.5"L x 9.5"W x 7"T.

More images of removing the U shaped trim to allow the charger cord connection to pull through.

Inspired by others that have removed the Varg charger from the stand and moved it into a different case, thought I'd start a dedicated thread for this. There are already some great images and info in the thread Poll: Are you using the original Stark Varg Stand/Charger as intended? but thought...