Search results

  1. DonCox

    Yet another CRF 250 Build but its my first so... ;)

    Dave, Bayodome has some valid comments, and some good ideas. I agree with not weakening the frames whenever possible. I think these cuts are minimal. But they do compromise the frames strength. But since you have a clean slate, lets look at his choices. On his YZ250F ebike, he is using the...
  2. DonCox

    Yet another CRF 250 Build but its my first so... ;)

    I have a 6.25x8.25x13" Amorge in a 2005 450CRF frame with only slight mods. I heard that the 250 frame is narrower
  3. DonCox

    Yet another CRF 250 Build but its my first so... ;)

    Yes you can ask for it and they will do both. I just received a battery from them, with Open discharge, but i did not spec 40A Discharge, so it only has 20A charge. Here are a couple of pictures of the KTM battery I just got. This is a 20S12P Molicel P42A cells, Open Discharge, and Charge...
  4. DonCox

    Yet another CRF 250 Build but its my first so... ;)

    I don't want to bad mouth Eon Lithium , but we have bought a few batteries from them, and have not been real happy. Bob knows Raymond there at EON Lithium real well, and has one of his batteries, and I put one in one of my customers bikes, and were not real keen on them. The battery you are...
  5. DonCox

    2010 CRF250 with V3

    No I’m not. I wanted to go but cannot. Austin at Electro and company are going to be there. It should be very interesting
  6. DonCox

    Yet another CRF 250 Build but its my first so... ;)

    I have just finished a 2005 CRF450 and I used 1/4" (6mm) 6061 aluminum. Lithium-King .com drew them up and had them waterjetted for me. But There is a offset needed for certain frames. Here is a picture (PDF) of the mounts superimposed on a Honda frame. Use all the mounts on the motor...
  7. DonCox

    Yet another CRF 250 Build but its my first so... ;)

    I believe the throttle used on the Stark is the same one used on the ALTA, it is the Hirschman Throttle. You could use it, but is has a large diameter and it makes it hard to actuate the front brake on the smaller bikes, and a lot of front brake master cylinders. There are ways around it and...
  8. DonCox

    Yet another CRF 250 Build but its my first so... ;)

    As far as thermal limits, the QS138 70H V3 is quite good. We ( probably 20+ DIY Bikes with pretty much the same QS138 70H V3, EM260S, 72V 50AH with an ANT smart BMS ) have not overheated the motor, We have overheated the controller without water cooling, and we have overheated the battery. The...
  9. DonCox

    Yet another CRF 250 Build but its my first so... ;)

    I have built a lot of these type bikes, and have just finished a 2005 450CRF. I used Lithium-king for mounts and sprockets, QS138 70H V3 motor and the Votol EM260S ( the EBMX X9000 is a very good controller ) and a Amorge battery. ( 20S12P Molicell P42A cells, ANT smart BMS in a metal box that...
  10. DonCox

    Half sized race battery?

    There are different cells that could be used for specific uses. The Samsung 50S cell gives 5000mah capacity, but create more heat at high current. But for trail riding or range, it gives you 20% more range than the Molicel and the same weight. But Stark has to start offering these options...
  11. DonCox

    Yet another CRF 250 Build but its my first so... ;)

    Yes they are made of steel, and work well. Two things I see are the third bolt for the motor and spacers in the front and rear mounts. You said you are waiting for the long bolts for the front motor mount with spacers, ( I use the stock bottom motor mount bolt from the gas motor ), and the...
  12. DonCox

    For Sale ELECTRO AND CO 28KW SUZUKI RMZ

    Yes I agree with Bayodome, you should never cut the frame. A lot of engineering goes into making these safe to jump.
  13. DonCox

    General Looking for a bike for my wife

    You give me a donor bike, and the qs138 70H V3 motor and controller is about $1000. About $1000 in metal, switches, mounts, wiring, usually new bushing in the swing arm and linkage, and shocks or fork rebuild. The battery is between $900 for good cells, Lishen, $1250 for Molicel P42A cells (...
  14. DonCox

    General Looking for a bike for my wife

    Go with a KX85 /100 Small wheel. I have built about 5 of these for friends and myself. Those 5 I have built have spawned off another 5 or so more. It is such a nice trackable adjustable platform. Wired Off Road make a close to bolt on kit for the KX85/100 2001 to almost current models...
  15. DonCox

    Is this a good generator? A-iPower GXS7100iRD 7100W Dual Fuel Inverter

    It is a little heavier, 110lbs compared to 139lbs, but they are both on wheels. 240V on the GSX7100 is a real plus to charge a Stark or Alta. The Predator only has 120V.
  16. DonCox

    KLX250SM build

    Have fun in Bali.
  17. DonCox

    KLX250SM build

    One other recommendation, on your Master On/OFF switch and Contactor. The QS10 plug that came with the battery has an anti spark feature, that only works if the Master switch and contactor are on. (continuity) , which you can't do without power hooked up ( because of the contactor). In all of...
  18. DonCox

    KLX250SM build

    Hell with the bike , is that your beautiful riding partner. Good job mate. That sure is black dirt. Anyway, here is a good tune, with the pictures. The pictures might be slightly different than the tune, we have made some slight changes. Most videos have to be in Youtube format. Don
  19. DonCox

    KLX250SM build

    Great work getting it all ready and tested so far. You should be able to attach photos to posts, I don't know what is up with that. Boy it is the middle of the summer heat here 110-120 degree F
  20. DonCox

    2023 Honda CRF250R with QS138 70H V3 Motor and EM260S Controller

    They are small feet, That's all they gave me. I have to be careful in strong winds, I get blown over...
Top Bottom