Search results

BRP unveils electric concepts with electric motorcycle, go kart, jet ski...

Oh you silly one you.

Check the connection between the sensor and harness. It's a separate harness for the subframe. Since the turn signals are working sounds like a loose contact.

Alta Error Codes @OneLapper - None of my documentation calls out a Code 100....1XX related codes are mapped to the DCCP or OBC...

You said connection under the motor...did you mean the brake pressure switch on the Brembo master cylinder? Also are your turn signals working?

There is no relay on the key. The signal from the key goes to the DCCP. Was the FW on the bike updated? This may have fallen through the cracks but there was a FW update to the DCCP which possibly fixed this issue. If bikes are not updated...can create this issue.

Boards are at my door today. I will be working on them this weekend to hopefully go out Saturday/Monday

Just asking, whats the last digits of the VIN?

Oh noes. Well I would recommend first flashing the BCU and BRDs first individually. Since you went through the automated process it thought you needed the inverter which means re-flashing that as well. You should be able to get the FW files for the BRDs and BCUs. But why are you flashing the BRDs?

Its a pretty bright LED. I also swapped to a LED light bulb so I dont have to hit that switch all the time.

@Mark911 not sure about the wiring harnesses, but the FW between MX and SM would allow that line to be active on the AUX connector. The firmware at the end was a bit mixed between EXR and MXR so there could have been with the last FW update good thing that happened.... (Also the routing on a...

Whoops.

Why is there black electrical tape over the check engine light?

Ah owners coming out of the woodwork since they need parts. Dont worry, help is out there. If your an MX or MXR looks like you need the shortened throttle without the throttle board connector in line with the harness. Once the OP posts this should be straight forward. How is it broken? FYI -...

There are boards still available. Until I go HOLY CRP there out we're okay.

Once im back from Bali I can take a gander at my SM.

If you can get a connect with the owner of Rocket, that will be funny as he has made quite a few comments about Alta in the past. Boards should not be the issue, its putting them together to create topcovers (as a member once said, hard to part with). Bummer the easy stuff did not work. Now for...

If you have MT, what does it say for all the lighting outputs?

PM me for a spare key barrel. Your going to have to take the deltawing off and pull the locking clip off.

liquid_performance on eBay This is through searching specfically Alta through the liquid performance store. @Philip when are they planning to post more parts?