Search results

So do I. But im in the Bay Area :P

This is what I use for my Altas and what we used in production for off lining the bike. https://www.klsupply.com/shop-lifts/mc475-dirt-bike-lift-35-6364.asp

You can...but that will be a nightmare for removal/install if the module needs to be removed. Taking the pack out the first time is a pain...but its much safer to deal with.

@C5tor I updated my MM link...and that thread amount is 19mm so a M6x25mm would work too.

That might have enough thread. The link I sent you on MM I use on both my bikes just fine.

M6 screw. That weird washer is a compression limiter. Dont lose it. Or just get one of these: https://www.mcmaster.com/61165K73/

And lets just say he "boasts" quite a bit for what its worth for his bikes and himself.

Cadillac Sign and Decal will make you the VIN label. But to be fully legal you need the VECI label. (I have those) some DMVs/CHPs will look for all the emissions labels so gotta make sure you have those. @Dluxor1 let me know if you need that label

Are you talking about the display foam holder? Liquid should have plenty of those in stock.

Since I just recently dealt with this on a A based bike, potentially one of the modules has gone completely bad (the HVPCBA may have failed on the BRD side). If MT can be used this will clearly show the modules that are affected.

Yeah...lets just say some one here mentioned to Sam about the collection in NZ (especially when Sam is from the Bay Area...and is looking for a bike for his wife...)

Just as an FYI that bolt was custom from Bossard (hardware supplier). Technically that M10 SHCS with that thread should work, but its partially threaded (about 35mm of the bolt is)

Code 007 is related specifically to the loss of isolation across the charging system = (charger - DCCP harness - DCCP) Beyond getting MT on the bike I would highly recommend checking the charger, the DCCP and harness. The DCCP is a box in the front bulkhead. It has connections to the battery...

Yep for good measure. Pandora's Box, Schrodinger's Cat ensued.

Which lower mounting bolt? The really long bolt?

Dont remind me how many times I caught that in End of Line....I got good at fixing kickstand switches.

Did they put the kickstand switch backwards? (there is a specific orientation)

No. Yes please connect MT to your bike. Ideally the battery tab graph will provide the most information ideally. I had myself a scare a few weeks ago because the algorithm detecting Code 36s is so SENSITIVE my SM had a quick blip and threw the error code (a bike with 3800miles on it)...

Haha, nothing really, that firmware got released on the forum and then "disappeared". The last ever update really had more quality of life upgrades, though that tip over sensor in the ACM has saved me a few times on the trails.

The FW on the V2 displays is v 2.18 it is a build which never officially came out on the bikes or the Forum. Ive been riding with this display firmware for over 2 years now and have had no issues with performance or charging. Some of the dev notes when it was to be pushed to the fleet...