- Likes
- 4,485
- Location
- Lake Havasu City, AZ
This thread is getting more views, so I am going to post a link here:
Want to buy - Want to buy an MXR - new or used
Want to buy - Want to buy an MXR - new or used
BAD NEWS
- Thread starter snydes
- Start date
Speedkills
Well-known member
- Likes
- 163
- Location
- Nederland, CO
For the guy who badly wanted a SMR, I see one for sale in the parts list 
Bloak
Well-known member
- Likes
- 134
- Location
- Ontario, Canada
I did a 2005 yz to 167. Used a maxpower 167 engine. Competitive with 250f on top end. I remember an upgraded shifter piece was needed, known issue for the 2005
Don't want to hijack this thread, but yea, I had the original 167 done by Rick Peterson (RPM) way back in 1999. I also did a 2000 RM 167 with Rick. The Yam was hands down much faster with way more torque. I never heard about the shifting issue until recently and I'm still a bit confused.
- Likes
- 2,801
- Location
- Pennsylvania
Don't worry, I think the for sale section is going to light up like a Christmas tree now.
- Likes
- 4,485
- Location
- Lake Havasu City, AZ
Ok, I need name for this section that does not suck. Any ideas?@Philip Maybe it's time for a new section for discussion of sourcing parts and manufacturing replacements, what to do about batteries, etc.
My proposal is to call it DAMN! "Distributed Alta Manufacturing Network"
Perhaps several sub-forums for Battery repairs and options, Electrical repairs, Alta-specific body parts?
- Likes
- 4,485
- Location
- Lake Havasu City, AZ
For the guy who badly wanted a SMR, I see one for sale in the parts list
This is an awesome find! Maybe if I am the first to place an order, they will ship me one?
- Likes
- 2,801
- Location
- Pennsylvania
I agree on several. I would think one specific to diagnostics and hacking firmware/software, maybe one specific to the battery since that will probably be an big issue in the future, another for other electrical and then maybe one big one for everything else.
Speedkills
Well-known member
- Likes
- 163
- Location
- Nederland, CO
Parts can be machined, finagled, etc., but what really disappoints me is no open sourcing of the software now that the company has folded. Literally all they had to do was upload a git repo to github, would have taken 5 minutes, and we would have had some hope of maintaining our bikes ourselves with alternate parts that need slight reworking of code to be compatible. For example, sooner or later we'll be out of throttles, and the company that makes them won't make anymore, but a different throttle could be adapted, but would almost certainly need small tweaks to the firmware to work properly. I still have a small hope that one of the employees that left will have a copy on their laptop that will end up open sourced as generic "electric motor control firmware" or at least hope it's not too well encrypted.
Silent But Dirty
Alta North
- Likes
- 394
- Location
- Canada
Don't worry, Im pretty sure it's out there
- Likes
- 2,801
- Location
- Pennsylvania
If it is, it will likely be well protected as a source of income for that person. I have no doubt ex Alta people have it and I wouldn’t blame them for not openly sharing it.
Not to mess the thread up but do the regular 2018 EXs with normal batteries throw any death codes rendering the bikes useless?
I've been looking around but cant find much, just the MXR thread on code 36. I only have 30 miles on my bike and trying to figure out whether I should cash my chips in or if this thing will run with no issues for a little while.
I've been looking around but cant find much, just the MXR thread on code 36. I only have 30 miles on my bike and trying to figure out whether I should cash my chips in or if this thing will run with no issues for a little while.
Matt Sanders
Member
- Likes
- 9
- Location
- Portland
Craigslist was good to me yesterday. While the Alta sits in limbo, I found a '17 300xcw with a plate(!!). Pretty much as far of an extreme as you can swing bike-wise. Not stoked to buy another bike, but also not stoked to not be able to ride.
- Likes
- 2,801
- Location
- Pennsylvania
Just to clarify the code 36 does not render it useless, it still charges and runs "normally". There would likely be a range reduction from this issue I'm told.
But to answer your question, I haven't heard of anyone with the A pack bikes having these problems. At least not that they have posted about.
- Likes
- 4,485
- Location
- Lake Havasu City, AZ
Alright... By popular demand of those who want to keep riding these bikes we are introducing to you a new forum category titled:
Repair
This category will have several sub-forums. Feel free to make suggestions, if something else can be improved.
The current thread is getting a bit off-topic from the Bad News. If you want to find ways to keep riding, please post your questions and answers in
Repair
Thank you.
Repair
This category will have several sub-forums. Feel free to make suggestions, if something else can be improved.
The current thread is getting a bit off-topic from the Bad News. If you want to find ways to keep riding, please post your questions and answers in
Repair
Thank you.
We are 3 owners of Redshifts EX (2018) - A battery. So far, so good.
